SlimSmile is the latest in minimally invasive cosmetic dentistry, offering prepless veneers as thin as 0.2mm.
Cosmetic dentistry is increasingly popular among consumers. However, the cost, time, and painful procedures involved in traditional cosmetic dentistry can be a major barrier to consumers going ahead with treatment. This is where SlimSmile is different.
Prepless digital veneer
Ultra-thin dental veneer, as thin as 0.2mm
Addresses a wide range of smile complaints
Digital technology every step of the way
Flexural strength of 400mpa
The latest in minimally invasive cosmetic dentistry
Delivering new smiles in as little as 2 patient visits
All ceramic material for high quality aesthetics
SlimSmile veneers are made ultra-thin and designed to be bonded to your patients' teeth, meaning no time-consuming and potentially painful tooth preparations are required – this also means there is no need for you to temporise the teeth between impressions and bonding the final SlimSmile veneers!
SlimSmile is simply bonded over the patient’s existing teeth, delivering a beautiful new smile in as little as two short visits!
That's a lot for both you and your patients to smile about!
No preparation required
No long dental appointments
No temporisation required
Frequently asked questions
Can I send PVS or alginate impressions?
Yes! You sure can.
Sending stone models
We love smashing records, but smashed dental records are no good!
Our pricing is available after signing up for a free account HERE.
How do I get started?
Submitting a case
How to send a case
Sending a case is easy and it's 100% online! Check out our how-to video below. We've also listed it out step-by-step incase you'd like to print the instructions.
Log in or set up your account HERE
Each time you submit a case online for PVS impressions, you'll be given a PDF packing slip and the option of selecting a courier to come now or select an approximate time in the coming days.
'Exporting' scans from Trios
After submitting your RX at provider.cyberdent.com.au and selecting 'Trios scans' from the materials menu, you'll need to send us your scans via Trios.
Sending cases by STL
Sending cases by STL is as easy as sending them as analogue impressions.
Exporting scans from Medit
Firstly go to Settings > Set Export Option > Always ask you each time you export. By doing this, you'll be able to select the file format of your models (we'll need STL. OBJ & PLY won't work)
Exporting scans from CEREC
We don't acceopt scans via Cerec-Connect portal, however, we do accept scans exported from the Open Scan STL versions listed below.
CEREC 4.5 and higher
Sirona Connect 4.5 and higher
Ortho 1.2 and higher
On your scanner software, go to upper left corner of the screen and select Export.
Select the location where you'd like to save the scans.
Use the drop down box to select STL from the list. Other file types will not work.
Rename the file to patient first initial and last name of the patient e.g Michael Scott becomes MScott.
Drag and drop your exported STL files into our case submission portal.
Reviewing your designs before manufacture
Communication is key to sucessful medical device manufacture. At Cyberdent we ensure all communications are tracked and manged in a timely manner via the our case portal.
How to bond SlimSmile
When you’re done, thoroughly rinse the restoration with water and dry with compressed air.
Now that you’re ready to bond your new veneer. Apply Monobond Etch & Prime on the adhesive surface using a microbrush and agitate it into the surface for 20 seconds. Allowing it to react for a further 40 seconds.
Thoroughly rinse off the Monobond Etch & Prime with water and dry the restoration with compressed air for approximately 10 seconds.
Next, install a rubber dam to provide a dry working field, then clean the teeth with fluoride-free paste, rinse with water, and dry with compressed air. You’re going to want to avoid over-drying the teeth.
Now apply Total Etch to the prepared tooth surface. Leaving the phosphoric acid to react for 15–30 seconds on enamel and for 10–15 seconds on any exposed dentin.
Rinse thoroughly with water for at least 5 seconds and dry with compressed air until the etched enamel surfaces appear chalky white.
Next, coat the tooth surface with Adhese Universal. The adhesive must be scrubbed into the surface for at least 20 seconds.
Disperse the Adhese Universal with compressed air until you get a glossy, immobile layer.
Next, you’ll need to light-cure the Adhese Universal for 10 seconds before applying Variolink Esthetic LC with the applicator tip directly to the internal surface of the restoration.
Now seat the veneer and hold it in place using a light, yet constant pressure.
Light-cure excess material around the cement line for 2 seconds at a distance of 10 – 15 mm and remove the excess material with a scaler.
Before the final curing, you’ll need to cover the restoration margins with Liquid Strip or glycerine immediately after excess removal to prevent oxygen inhibition.
Light-cure the cement for at least 10 seconds per mm thickness, per segment.
Rinse off the L iquid Strip or glycerine and remove the rubber dam.
Adjusting the proximal areas is easy using ContacEZ polishing strips, you can then polish the restoration margins.
Finally, apply a thin film of fluoride polish and dry with compressed air.
1300 789 368
F47 2 Slough Avenue Silverwater NSW 2128